Holley Offers Classic Weiand Finned Oil Pans
Holley // 866.464.6553 // Holley.com
Intended as a direct replacement for stock, factory-style oil pans, Holley/MSD announces it now carries classic finned oil pans from Weiand. Designed with the hot rodder in mind, the cast-aluminum pans have a 4-quart capacity to dissipate heat and lower oil temperatures to enhance engine life. Complete with a nostalgic look, the oil pans include a matching gasket, pickup tube, and pan bolt kit for fast, easy installation. Offered in two finishes—polished and black powdercoat—they are made to fit popular 1986–2002 small-block Chevrolet and 1965–1987 small-block Ford applications.
Price: $229.99 or $239.99, depending on application and finish
Wilwood Front Drag-Race Brake Kits
Wilwood Engineering // 805.388.1188 // Wilwood.com
Wilwood Engineering is now offering eight new front drag-race brake kits designed to fit popular front brake kits for high-mph, door-slammer drag cars. Available with lightweight, full-floating configuration, a dynamic mount rotor allows for controlled movement at the rotor-mount points, eliminating thermally induced stress and subsequent rotor distortion. These benefits, coupled with a controlled knock-back release of the brake pads, help to extend component life, reduce drag down the track, and improve e.t.’s.
Price: $979.99 from Wilwood.com
Chrono Series Gauges from Auto Meter
Auto Meter // 866.248.6356 // AutoMeter.com
As the newest addition to its line of popular American-built gauges, Auto Meter’s fresh Chrono Series is available in a range of 2-inch instruments and designed with a timeless style. Compatible for 12- and 16-volt applications to fit nearly every street car or race car electrical system, the setting can be programmed between 0 and 280 ohms. The gauges allow for 320 degrees of pointer movement, providing the most accurate reading in an analog dial. Other modern aesthetics include a low-rise, three-dimensional, flush-mount window in an anodized setting with white LED through-dial lighting for optimal visibility. Gauge kits are available on an adjustable scale with seven ranges preset for 73E/10F, 16E/158F, 0E/30F, 0E/90F, 240E/33F, 107.5E/7F, and 131E/12F vehicles. A 20-foot wiring harness, mounting hardware, and installation instructions are included.
Price: Approximately $145 to $250
Master Inner Tie-Rod Tool Set from OEM Tools
OEM Tools // 866.968.6657 // OEMtools.com
Chasing after a streamlined process to remove and reinstall inner tie rods without removing the rack-and-pinion? Check out OEM Tools’ new master inner tie-rod tool set (PN 27178). Ideal for servicing small cars, pickups, and large SUVs, the tube handle has a 2.125-inch inner diameter and a 1/2-inch drive tube handle to help ease the swap and attain proper torque. The kit also includes nickel-plated SAE and metric adapters designed to accommodate vehicles with larger tie rods and 12 crowfoot-style adapters in the following sizes: 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inches, and 29, 32.5, 33.6, 38.4, 40, and 42mm. The kit is delivered in a sturdy, molded case to prevent damage.
Price: Approximately $70 at Amazon.com
The post New Products for Your Ride! appeared first on Hot Rod Network.